Download PDF
Free download in PDF Fitter Multiple Choice Questions and Answers for competitive exams. These short objective type questions with answers are very important for Board exams as well as competitive exams. These short solved questions or quizzes are provided by Gkseries.
(1)
Forging is done when the metal is in
[A]
Plastic condition
[B]
Elastic condition
[C]
Liquid condition
[D]
None of the above
Answer: Plastic condition
(2)
A die is?
[A]
External thread cutting tool
[B]
Acme thread cutting tool
[C]
Internal thread cutting tool
[D]
Square thread cutting tool
Answer: External thread cutting tool
(3)
Which one of the following key is used on automobile shaft
[A]
Hollow saddle key
[B]
Woodruff key
[C]
Gib head key
[D]
Taper key
(4)
Which one of the following materials is used for manufacturing centre drills
[A]
High speed steel
[B]
Cast steel
[C]
Mild steel
[D]
Cast iron
(5)
S.W.L. means?
[A]
Stable working load
[B]
Side working load
[C]
Safe working load
[D]
Standard working load
Answer: Safe working load
(6)
A black malleable cast iron?
[A]
Is steel cast in moulds
[B]
Is a raw casting
[C]
Which through malleablizing and is decarburized at the outer skin
[D]
Can be worked with hard cutting tools
(7)
Helix angle is found on?
[A]
Threaded workpiece
[B]
Taper turning attachment
[C]
Feed rod of lathe
[D]
Threading tool
Answer: Threaded workpiece
(8)
A hydraulic shaper is driven by
[A]
Hand pressure
[B]
Liquid pressure
[C]
Steam pressure
[D]
Air pressure
(9)
When tapping aluminium and copper what coolant is used
[A]
Dry
[B]
Lard oil
[C]
Kerosene
[D]
Soda water
(10)
H.S.S. is tempered at
[A]
550 to 600°C
[B]
280 to 400°C
[C]
230 to 270°C
[D]
220 to 230°C
(11)
While grinding one must use
[A]
Safety goggles
[B]
Sun goggles
[C]
Dark glass screen
[D]
Mask
(12)
Swage block is made of
[A]
Malleable cast iron
[B]
Tool steel
[C]
High carbon steel
[D]
Mild steel
Answer: Malleable cast iron
(13)
A drilled hole after tapping is called?
[A]
Tapped hole
[B]
Reamed hole
[C]
Chain hole
[D]
Core hole
(14)
A tumbler gear unit consists of
[A]
One gear
[B]
Three gears
[C]
Four gears
[D]
Two gears
(15)
The least count of a vernier caliper is
[A]
0.02mm
[B]
0.05mm
[C]
0.01mm
[D]
0.10mm
(16)
The accuracy of reference gauge is
[A]
0.05mm
[B]
0.01mm
[C]
0.001mm
[D]
0.0001mm
(17)
Which one of the following is a temporary joint
[A]
Soldered joint
[B]
Press fit joint
[C]
Riveted joint
[D]
Welding joint
(18)
Which one of the following belt fasteners is used for heavy duty machines
[A]
Alligator type
[B]
Jackson type
[C]
Lagrell type
[D]
Wire type
(19)
V block vee groove angle?
[A]
120°
[B]
90°
[C]
60°
[D]
30°
(20)
Mallet is made of?
[A]
Hard wood
[B]
Cast iron
[C]
Brass
[D]
Lead
Please share this page