GkSeries.com

Tool Life Quiz | Tool Life Objective Type Questions and Answers

Download PDF

Free download in PDF Tool Life Objective Type Questions and Answers for competitive exams. These short objective type questions with answers are very important for Board exams as well as competitive exams. These short solved questions or quizzes are provided by Gkseries.
Go To Download Page
(21) The cutting velocity in m/sec, for turning a work piece of diameter 100 mm at the spindle speed of 480 rpm is
[A] 2.51
[B] 151
[C] 1.26
[D] 48
Answer: 2.51
(22) Which of the following tool materials have cobalt as a constituent element?

1. Tungsten carbide 2. CBN 3. Stellite 4. UCON

Select the correct answer using the codes given below
[A] 1 & 2
[B] 1 & 3
[C] 1 & 4
[D] 2 & 3
Answer: 1 & 3

DOWNLOAD CURRENT AFFAIRS PDF FROM APP

(23) The approximately variation of the tool life exponent ‘n’ of cemented carbide tools is
[A] 0.20 to 0.48
[B] 0.48 to 0.70
[C] 0.03 to 0.08
[D] None of the above
Answer: 0.20 to 0.48
(24) The coating materials for coated carbide tools, include
[A] TiC and TiN
[B] TiC and NaCN
[C] TiN and NaCN
[D] TiC, TiN and NaCN
Answer: TiC and TiN
(25) Which one of the following grinding wheels (with grade, grit and bond) is suitable for cutter grinding?
[A] T 60 resinoid
[B] T 320 resinoid
[C] K 60 vitrified
[D] None of the above
Answer: K 60 vitrified
(26) Using the Taylor equation VT^n=c, calculate the percentage increase in tool life when the cutting speed is reduced is reduced by 50% (n=0.5 and c=400)
[A] 300%
[B] 400%
[C] 100%
[D] 50%
Answer: 400%
(27) Consider the following actions:

1. Mechanical abrasion

2. Diffusion

3. Plastic deformation

4. Oxidation

Which of the above are the causes of tool wear?
[A] 2 & 3
[B] 1 & 2
[C] 1, 2 & 4
[D] 1 & 3
Answer: 1, 2 & 4
(28) Tool material not suited to resistance welding is
[A] Stellite
[B] Masonite
[C] High speed steel
[D] Aluminium oxide
Answer: Stellite
(29) Consider the following statements: Chipping of a cutting tool is due to

1. Tool material being too brittle

2. Hot hardness of the tool material

3. High positive rake angle of the tool

Which of these statements are correct?
[A] 1, 2 & 3
[B] 1 & 3
[C] 2 & 3
[D] 1 & 2
Answer: 1 & 3
(30) A milling cutter of 70 mm diameter with 12 teeth is operating at a cutting speed of 22 m/min and a feed of 0.05 mm/tooth. The feed rate per minute is
[A] 60 mm/min
[B] 6 mm/min
[C] 110 mm/min
[D] 35 mm/min
Answer: 60 mm/min
31 Tool life is most affected by machine.......
[A] Feed and depth
[B] Microstracture of material being cut
[C] Cutting speed
[D] Tool geometry
Answer: Cutting speed
32 Tool life is said to be over if.......
[A] Overheating and funning due to friction start
[B] Sudden increase in power and cutting force with chattering take place
[C] A poor surface finish is obtained
[D] All of the above
Answer: All of the above
33 Sanding is a process of removing metal surfaces or wood fibres by.........
[A] Cutting
[B] Planning
[C] Sawing
[D] Filling
Answer: Cutting
34 Sanding belts are made of cloth, coated with various grades of......
[A] Aluminium oxide
[B] Diamond
[C] Gravel
[D] None of the above
Answer: Aluminium oxide
35 The materials are added to cutting tools to increase their properties. Match the following

1. Tungsten a. Hardness

2. Carbon b. Hot hardness

3. Vanadium c. Wear resistance

The correct order is
[A] 1-b, 2-a, 3-c
[B] 1-c, 2-a, 3-b
[C] 1-b, 2-c, 3-a
[D] 1-a, 2-b, 3-c
Answer: 1-b, 2-a, 3-c
36 Which of the following is not a constituent of High speed steel?
[A] Ni
[B] Cr
[C] W
[D] None of the above is correct.
Answer: Ni
37 Match list-I (Cutting tool material) with List-II (Typical value of tool life exponent ‘n’ in the Taylor’s equation V.T^n=C) and select the correct answer using the codes given below the lists:

List I List II

a. HSS 1. 0.18

b. Cast alloy 2. 0.12

c. Ceramic 3. 0.25

d. Sintered carbide 4. 0.5

[A] a-1, b-2, c-3, d-4
[B] a-2, b-1, c-3, d-4
[C] a-2, b-1, c-4, d-3
[D] a-1, b-2, c-4, d-3
Answer: a-2, b-1, c-4, d-3

Please share this page

Click Here to Read more questions

Teacher Eligibility Test